School of Electrical & Electronics Engineering

Equipment Name Capability & Uses
NIDA trainers testing of electronic components like SCR, OP amplifiers etc
PCB etching machine ciruit board manufacture
Advanced Photvoltaic Training System Experiments on solar panels, system sizing, PV characteristics, stand-alone system etc.
Solar Module with solar Altitude Emulator
Wind and solar hybrid system, 300 W 3 phase loading, sectionalizing loads etc.
Standby generator controlled by PLC demonstration DOL, star delta, forward/reverse starter
Soft starter baking, drying of stators during winding process
Bench grinders motor winding
Winding machine cutting and bending
Shear and slip roll power supply
Power generators (petrol), 2.5 KVA workshop practice
Stators for training on winding process 2 kits with 20 modules for conduct of around 66 experiments on 1/3 phase supply, synchronisation of generators etc
Baxter Research Robot with 2 electric grippers and 4 pneumatic grippers Software/algorithm development and testing in the area of mechatronics, computer vision, machine learning. Application for pick and place, object sorting etc.
Wheeled Mobile Robot – 1 Obstacle avoidance, video surveillance
Wheeled Mobile Robot – 2 Path tracking, lane following
Wheeled Mobile Robot – 3 Object detection and tracking
CNC Drilling Machine Drilling PCB holes
6.5 Digit Precision Multimeter AC and DC Measurements
Digital storage oscilloscope (Dual Trace) Signals analysis
Dual Power Supply Regulated DC power supply
Soldering Station Soldering components on PCB
Desktop PC set Programming, simulations
Desktop PC Tower Controlling CNC drilling machine
D.C. Generator To study the load characteristics of a D.C Compound generator.
D.C. Motor
Rheostat
Voltmeter
Ammeter To plot the magnetization characteristic of a D.C. shunt generator, running at rated speed.
Rheostat
Tachometer
D.C. Motor,
D.C. Generator To study the load characteristics of a D. C. Shunt generator.
Rheostat
Ammeter
Voltmeter
D.C. shunt motor To determine the efficiency of a D.C. shunt motor by Brake test & Plot speed Torque characteristic.
Pulley arrangement
Single phase transformer To perform Sumpner’s test on two identical transformers.
Wattmeter
Voltmeter
Auto transformer
SPDT
D.C. Shunt motor To study the speed control of a D.C. motor.
Ammeter (M.C.)
Tachometer
Rheostat
D.C. Generator To study the load characteristics of a D.C Series generator.
D.C. Motor
Rheostat
Single Phase Transformer To perform the open circuit and short circuit tests on a single-phase transformer.
Wattmeter
Main transformer (a) To find the polarity of primary and secondary windings.
Voltmeter (b) To measure voltage ratio of primary and secondary windings.
Single Phase Transformer To perform load test on the single phase transformer to determine the following
Wattmeter (a) Efficiency at different loads and to plot efficiency Vs. load curve
Ammeter (b) Regulation of the transformer and to plot regulation Vs. load cure
Alternator set with Starter To study the effect of variation of field current upon the stator current with synchronous motor running at no load, hence to draw V and inverted V-curves of the motor.
Voltmeter
Autotransformer, To perform no-load and blocked rotor test on a three-phase squirrel cage induction motor   & hence determine its equivalent circuit.
Ammeter
Autotransformer  , To perform load test on a three-phase induction motor & draw
Ammeter (b) Power factor-line current characteristic
Autotransformer  , To perform no-load & blocked rotor tests on a single-phase induction motor and determine its equivalent circuit.
Ammeter
5 HP DC Shunt motor coupled with 3 phase 3KVA Alternator Perform parallel operation on two alternators and study
AC Ammeter (i) The effects of variation of excitation and,
AC Voltmeter (ii) Effect of variations of prime mover input.